Follow

How do I add Pandora to my network player?

1.  First make sure that your network player is upgraded to the very latest firmware version (see release notes), by navigating to Settings -> Firmware -> Check for updates.

2.  Now you need to find the IP address of your network player. The IP address can be found either on the front panel (under Settings -> Network -> Current Config, then scrolling to IP Address), or from the Cambridge Connect app by tapping the info (i) button next to the name of the Stream Magic device you want to configure in the Players screen (see image below).

 

3.  Now type the IP address of your player into the web browser (eg. Safari/Chrome) of your phone, tablet or laptop. Note, your phone, tablet or laptop must be connected to the same wi-fi network as your network player.

Your network player's web configuration page will now be displayed, allowing you to link or unlink your premium streaming service. 

 

 

Pandora will be accessible from the "Radio" option on your player and usable from the front panel of the player rather than an app.

Please note: Pandora is only available in the USA, Australia and New Zealand and is not available on our Receiver products.

Was this article helpful?
0 out of 1 found this helpful
Have more questions? Submit a request
Powered by Zendesk